Description

This is a vanity base cabinet that includes one working drawer above one working door.

Notes:

• When height changes, lower opening height changes. Upper opening height is fixed at 5".
  

All Plywood Construction:

• Front Frames: 3/4" thick solid wood with 1-1/2" wide stiles and rails unless otherwise specified. Blind mortise and tenon joints. Non-standard configurations must be ordered as custom front frames.
• Cabinet Sides: 1/2" thick plywood with prefinished White Birch veneer on the interior face.
• Cabinet Tops: 1/2" thick plywood with prefinished White Birch veneer on the interior face. Most Base cabinets have open tops with two 1/2" thick x 3" deep plywood support strips running across the full width of the cabinet in the front and back. Base Sink and Vanity Sink cabinets include cut­back support strips that run front to back to ease sink installation. Some Specialty cabinets have full tops.
• Cabinet Bottoms: 1/2" thick plywood with prefinished White Birch veneer on the interior face.
• Cabinet Backs: 1/2" thick plywood with prefinished White Birch veneer on the interior face.
• Shelves: 3/4" thick White Birch plywood with a banded front edge. Both sides of White Birch plywood shelves are finished with a UV topcoat. Shelf height is adjustable in 32mm increments. Plywood shelves are standard and can be upgraded to a solid Natural Birch wood shelf on most cabinets.
  Drawer Boxes: English dovetail construction. 5/8" thick solid wood with eased top edge. 1/4" thick bottoms are standard; 3/8" thick bottoms with additional drawer box options are available. Drawer boxes are finished with a durable UV topcoat. Natural Birch is standard, Hard Maple and Walnut upgrades are available.
• Toeboard Backers: 1/2" thick plywood with prefinished White Birch veneer on both sides. Designed to fully enclose toe space and provide support for applied finished toeboards.
• Toeboard Strips: Available in 4" high x 8' long x 1/2" thick plywood strips in Cherry, Hard Maple or Red Oak.
• Prefinished Interior: Clear UV topcoat on interiors is standard. The UV topcoat is on the interior of the backs, tops, bottoms and sides. If you wish to finish the interior cabinet surfaces order Matching Specie Interior Option.
• Matching Specie Interior: Matching Specie Interior cabinets are unfinished. Drawer box parts and solid wood shelf upgrades are not available with Matching Specie Interior and will be finished with a durable UV topcoat.

Specifications

• Weight: 200gr
• Usage: Indoor & outdoor

Pros and cons

• Sustainably produced
• Ideal for everyday use
• May discolor in direct sunlight